Cumulative effect assessment in Canada: a regional framework for aquatic ecosystems

Sustainable development of the aquatic environment depends upon routine and defensible cumulative effects assessment (CEA). CEA is the process of predicting the consequences of development relative to an assessment of existing environmental quality. Theoretically, it provides an on-going mechanism to evaluate if levels of development exceed the environment's assimilative capacity; i.e., its ability to sustain itself. In practice, the link between CEA and sustainable development has not been realized because CEA concepts and methods have developed along two dichotomous tracks. One track views CEA as an extension of the environmental assessment (EA) process for project developments. Under this track, stressor-based (S-B) methods have been developed where the emphasis is on local, project-related stressors, their link with aquatic indicators, and the potential for environmental effects through stressor-indicator interactions. S-B methods focus on the proposed development and prediction of project-related effects. They lack a mechanism to quantify existing aquatic quality especially at scales broader than an isolated development. This limitation results in the prediction of potential effects relative to a poorly defined baseline state. The other track views CEA as a broader, regional assessment tool where effects-based (E-B) methods specialize in quantification of existing aquatic effects over broad spatial scales. However, the predictive capabilities of E-B methods are limited because they are retrospective, i.e., the stressor causing the effect is identified after the effect has been measured. When used in isolation, S-B and E-B methods do not address CEA in the context necessary for sustainable development. However, if the strengths of these approaches were integrated into a holistic framework for CEA, an operational mechanism would exist to better monitor and assess sustainable development of our aquatic resources. This paper reviews the existing conceptual basis of CEA in Canada including existing methodologies, limitations and strengths. A conceptual framework for integrating project-based and regional-based CEA is presented.     

建设项目现状环境影响评价数据引用的探讨

对建设项目环境影响现状监测历史数据的所有权归属进行了分析,环境监测机构具有现状监测成果的所有权,委托方有使用权.应对环境现状监测数据进行知识产权保护,使监测数据得到更好利用.     

共振光散射技术在环境分析中的应用

共振光散射技术是一项在普通荧光分光光度计上进行测量的光散射技术,文章简要介绍了光散射现象,共振光散射的基本原理并作了定量基础讨论,对共振光散射技术在环境分析中的应用作了初步研究。     

悬浮物对三峡水库水质测定结果的影响

以长江寸滩断面和嘉陵江大溪沟断面水样为测定样品,探讨了悬浮物对三峡水库水质测定结果的影响,提出在三峡水库水质监测中,应对经0.45μm滤膜过滤的滤液进行指标测定,同时测定悬浮物含量,并对悬浮物进行组分分析;建议在地表水环境质量标准中,纳入悬浮物项目。     

地面水环境质量评价的有时序多目标决策方法

将有时序多目标决策方法应用于地面水环境质量优势的比较，介绍了决策方法的原理和评价步骤。实例分析表明该方法计算过程简便，分辨率高，排序结果与实际环境质量状况相符合。     

酸性法测定高锰酸盐指数加热时间的选择

酸性法测定高锰酸盐指数，会因实验条件的差异产生不同的结果。对不同加热时间，加热方式等因素进行了试验，结果表明加热时间以水浴加热沸腾３０ｍｉｎ或电炉直接加热８ｍｉｎ为宜。     

关于模糊数学在环境质量综合评判中“最大隶属度”原则不适用性的讨论

通过对模糊数学在环境质量综合评判中的分析，指出“最大隶属度”原则的不适用性，并根据环境质量分级所存在的固有关系提出改进的方法。     

环境样品中痕量锰的催化动力学测定法

对环境样品中痕量锰的催化动力学测定方法进行简要评述，引述文献１６篇。     

开展建设项目施工期的环境管理与环境监测

分析了建设项目施工期的环境影响，阐述了开展施工期环境管理与环境监测的必要性，介绍了施工期环境管理的实施手段，施工单位的环境管理制度，施工期环境监测的主要内容及对环境监测部门的要求，建议将施工期的环境管理与环境监测纳入正常的环保管理渠道之中，实现建设项目的全过程环境管理。     

液氯意外泄漏的应急监测

介绍了京沪高速“3.29”液氯意外泄漏污染事故的应急监测中正确确立气、土、水、植物等环境介质作为监测对象,科学确定氯、氯化氢为监测因子,并因事制宜科学地选择监测方法,为事故处理指挥部迅速正确处理事故提供了优质快速的技术支持。